O-Ring Cords
A cord is a continuous elastomeric material with a round cross-section used to create O-rings, sold by the meter.
How it is made:
A hot bonding kit is required to create O-rings from wire.
To calculate the required length of wire, you may use the following formula:
((OD + ID) / 2) x Pi = Length
(where Pi = 3.14159).
Tereefek Solutions offers O-ring cords in all standard sizes AS568 and ISO 3601, as well as many additional non-standard sizes. Our cords are available in square, support, X, and other shapes.
Cords are made from various materials (nitrile rubber, EPDM, FKM, silicone, etc.), different dimensions, hardness grades, and colors.
These sell in "drums" and can also be sold in smaller quantities if needed.
Cord Materials:
NBR Cord Datasheet - Compound 366301
FKM Cord Datasheet - Compound 514308
EPDM Cord Datasheet - Compound 559301
Silicone Cord Datasheet - 714217